Semiconductor Jobs After ITI in Assam
ITI graduates are likely to form the backbone of a semiconductor cluster’s technician workforce. Inside the plant, machine maintenance, utilities, gases, cleanroom air and power hire from ITI trades. Outside it, toolrooms, stamping and plating shops, gas plants, calibration labs, equipment repair workshops and construction contractors hire from the same trades.
The likely skill gap is not the trade itself but semiconductor practice: cleanroom discipline, static-safe handling and the specific machines. Short courses and plant training are likely to close it.
Research-based guide. Built from public announcements, published workforce studies and how comparable plants elsewhere are staffed. It has not yet been validated with employers in Assam. Roles, requirements and employers described here are what we think is likely, not confirmed hiring plans. Check with employers and training providers before making decisions. How we built it.
What to Do Next
- Find your trade in the table below to see which roles it leads to.
- Add a short semiconductor course: the ESSCI semiconductor manufacturing micro-credential or the Assam Skill University course.
- Apply for an apprenticeship or technician role; apprenticeships under NAPS are a common entry route.
- After two to three years, a lateral-entry diploma opens supervisor and senior technician roles.
Your Course and the Jobs It Leads To
Find your trade, branch or qualification in the left column.
Jobs You Can Apply For After ITI
25 roles in this guide start at this level, at the plant and across its suppliers and service firms.
Wire Bond Technician
Sets up and maintains wire bonding machines that connect a chip to its package with wires thinner than a hair.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 6 to 12 months
Die Attach Technician
Keeps die bonders running: the machines that pick each chip off the wafer and glue or solder it onto its package.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 6 to 12 months
Mould and Trim-Form Technician
Runs and maintains the presses that seal chips in protective plastic and the tools that cut and bend their metal leads.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 6 to 9 months
Semiconductor Equipment Maintenance Technician
Carries out scheduled maintenance and repairs across assembly and test machines, working under an equipment engineer.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 6 to 12 months
Metrology and Calibration Technician
Calibrates every measuring instrument in the plant so that every measurement can be trusted and traced to a national standard.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 3 to 6 months
Ultrapure Water Plant Operator
Runs the plant that makes water purer than laboratory grade, used to rinse chips. A contamination slip here can scrap a day’s output.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 3 to 6 months
Gas Systems Technician
Looks after the nitrogen, hydrogen and specialty gas supply, including cabinets that hold toxic gases, with zero tolerance for leaks.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 3 to 6 months
Cleanroom HVAC Technician
Keeps cleanroom air filtered, at the right temperature and humidity, and at the right pressure, 24 hours a day.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 3 to 6 months
HT Electrical and UPS Technician
Maintains the high-tension substation, backup generators and battery systems that stop a power cut from scrapping work in progress.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 3 to 6 months
Effluent Treatment Plant Operator
Treats the plant’s chemical wastewater so that it meets pollution board limits before discharge or reuse.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 3 months
Chemical Handling Technician
Receives, stores and delivers the acids, solvents and other chemicals the plant uses, safely and with full records.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 2 to 3 months
Fire and Emergency Response Officer
Runs fire detection and suppression systems and leads the response team for fires, gas leaks and chemical spills.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Anchor plant
- Training after hiring
- 3 months
Leadframe Stamping and Etching Technician
Runs high-speed presses and etching lines that make leadframes, the thin metal frames a chip is mounted on and connected through.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Supplier
- Training after hiring
- 6 to 12 months
Bonding Wire Production Operator
Draws gold, copper or silver into wire finer than a hair, then anneals, tests and spools it for wire bonding machines.
- Start with
- ITI
- Level
- Operator
- Likely employer
- Supplier
- Training after hiring
- 3 to 6 months
Specialty Chemical Blending Operator
Mixes, purifies and repacks the high-purity chemicals, plating solutions and moulding compounds that chip plants consume.
- Start with
- ITI
- Level
- Operator
- Likely employer
- Supplier
- Training after hiring
- 3 to 6 months
Industrial Gas Plant Operator
Runs the on-site plant, usually owned by a gas company, that separates air into the nitrogen and other gases a chip plant uses around the clock.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Supplier
- Training after hiring
- 6 months
CNC Machinist and Toolroom Technician
Machines precision parts, fixtures and tooling for the plant’s machines, to tolerances of a few microns.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Supplier
- Training after hiring
- 6 to 12 months
Electroplating Technician
Runs plating baths that coat metal parts and chip leads with tin, nickel, palladium or gold.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Supplier
- Training after hiring
- 6 months
Test Board and Socket Technician
Builds, repairs and checks the circuit boards and sockets that hold chips during testing and burn-in.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Supplier
- Training after hiring
- 3 to 6 months
Precision Parts Cleaning Technician
Cleans, strips and recoats worn machine parts to semiconductor standards so that they can go back into service.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Equipment services
- Training after hiring
- 3 to 6 months
Equipment Refurbishment Technician
Repairs and rebuilds machine modules, vacuum pumps, chillers and motion parts in a service workshop, so plants do not wait for imports.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Equipment services
- Training after hiring
- 6 to 12 months
Orbital Welder (High-Purity Piping)
Welds the stainless-steel tubing that carries ultra-pure gases and chemicals, using automated orbital welding machines.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Construction
- Training after hiring
- 3 to 6 months plus certification
Cleanroom Fit-out Technician
Builds the cleanroom itself: wall and ceiling panels, raised floors, filter units and sealing.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Construction
- Training after hiring
- 1 to 3 months
MEP Pipefitter
Installs the water, drain, exhaust and utility piping that serves the cleanroom and its machines.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Construction
- Training after hiring
- 1 to 3 months
Process Hook-up Technician
Connects each new machine to power, gases, water, vacuum and exhaust, then helps prove it runs safely.
- Start with
- ITI
- Level
- Technician
- Likely employer
- Construction
- Training after hiring
- 3 to 6 months
Roles You Can Grow Into
The next rung up from the roles above, usually reached with experience or a further qualification.
- Assembly Process Engineer Owns a packaging process step, such as wire bonding or moulding, and is responsible for its yield, q...
- Semiconductor Equipment Engineer Owns a fleet of machines: their uptime, spare parts, upgrades and the technicians who maintain them.
- Facilities Engineer Owns one or more plant utility systems, from water and gases to air and power, and their uptime, upg...
- EHS Officer Keeps the plant safe and legally compliant: risk assessments, safety training, incident investigatio...
- Supplier Quality Inspector (MSME) Inspects parts at a supplier factory before they ship to the chip plant, and keeps the records the p...
- Materials and Chemical Testing Analyst Tests incoming chemicals, water, metals and effluent at an independent or in-house lab, so that plan...
- Semiconductor Test Technician Maintains testers, handlers and burn-in ovens, swaps test sockets and load boards, and keeps test ce...
- Field Service Engineer (Equipment Maker) Works for the company that made the machines, installing and repairing them at the plant. Often trai...
- Cleanroom Testing and Certification Technician Tests cleanrooms with particle counters, airflow meters and filter leak tests, and certifies that th...
Other Starting Points
Where to train: see semiconductor courses in Assam. Pay figures on role pages are national benchmarks, explained on the methodology page.